When I bypass the solenoid and connect a hot wire from the battery to the starter, the starter works fine. I was able to get a new ignition switch and was going replace the old one. The problem I have now is knowing what wires to attach to which post on the new switch. The new switch is a little different than the old one. I have the schema for the new switch as to which post is supposed to have which wire, I just don't know on my old switch which wire is which. The only ones I know for sure are the hot and ground. I need to find a color code map for the old wires. There is a purple wire, yellow and red wire, black and yellow wire, and orange wire along with the red and black wires.
|