Last weekend i checked all of the welds on the boat and they're ok. I filled my livewell to the top and plugged the fill and drain and it held with no leaks. I filled the hull with water and no leaks.
The back of my boat sits low in the water so i think what happened is i stopped abruptly and my wave went over the back of my boat filling it instantly. Ive always been aware that can happen so i usually slow down easy or let off the throttle and give it a little gas. If my bilge pump hadn't failed and i had noticed it sooner i wouldn't have flipped over. I spent about 4 hours on the lake Sunday with no problems.
Operator error!!!
Last edited by nofish; 08-19-2012 at 12:47 AM.
|