bfish
11-13-2014, 10:18 PM
Been thinking about selling my boat. It is set-up for pulling jigs/cranks and pushing.
1996 Alumacraft Lunker V16 LTD 50th anniversary model (16.75 ft and only 560 lbs).
25 hp Honda tiller with a newish 4-blade prop (better control when trolling). Also have tiny-tach installed. Solo runs around 28-29 mph and trolls around 1.7 mph. 3-blade ran about 33 mph and trolled 1.5 mph. Rated for up to 45 hp tiller.
55 lb, Minnekota Edge foot control bow mount
Lowrance x75 and an Eagle (not sure if it works)
Sits in a garage on Hustler trailer with radial tires
Bimini top mounted to tracks (about 3 ft long) so top can be slid towards the bow or stern
Spyderlok 4-pole holder on the bow. I use it for pushing, but it can also be used for spider-rigging
6 rod holders along gunnels, 2 roberts and 4 rod tender brand. They all adjust up/down and swivel 360 degrees.
I will try and find some better pics, but here is what I could find quickly:
https://scontent-b-lga.xx.fbcdn.net/hphotos-xpf1/v/t1.0-9/1382041_552274458170941_1232990906_n.jpg?oh=ca7c11 637fe9cc4a8a7a229dcb91bded&oe=54F2CF4D
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xfp1/v/t1.0-9/304426_410042969060758_1282468472_n.jpg?oh=b5869eb 6d2e26a50c0435563076cf2a4&oe=54E7ED0B&__gda__=1425519082_af7e285964132722936532fbd832842 b
https://scontent-a-lga.xx.fbcdn.net/hphotos-xaf1/v/t1.0-9/10155647_741156309282754_6400926312826707205_n.jpg ?oh=c4d407d2da52d73223bd3ef651f7d7a8&oe=54EB1DE5
asking $4500, I am near Chattanooga
1996 Alumacraft Lunker V16 LTD 50th anniversary model (16.75 ft and only 560 lbs).
25 hp Honda tiller with a newish 4-blade prop (better control when trolling). Also have tiny-tach installed. Solo runs around 28-29 mph and trolls around 1.7 mph. 3-blade ran about 33 mph and trolled 1.5 mph. Rated for up to 45 hp tiller.
55 lb, Minnekota Edge foot control bow mount
Lowrance x75 and an Eagle (not sure if it works)
Sits in a garage on Hustler trailer with radial tires
Bimini top mounted to tracks (about 3 ft long) so top can be slid towards the bow or stern
Spyderlok 4-pole holder on the bow. I use it for pushing, but it can also be used for spider-rigging
6 rod holders along gunnels, 2 roberts and 4 rod tender brand. They all adjust up/down and swivel 360 degrees.
I will try and find some better pics, but here is what I could find quickly:
https://scontent-b-lga.xx.fbcdn.net/hphotos-xpf1/v/t1.0-9/1382041_552274458170941_1232990906_n.jpg?oh=ca7c11 637fe9cc4a8a7a229dcb91bded&oe=54F2CF4D
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xfp1/v/t1.0-9/304426_410042969060758_1282468472_n.jpg?oh=b5869eb 6d2e26a50c0435563076cf2a4&oe=54E7ED0B&__gda__=1425519082_af7e285964132722936532fbd832842 b
https://scontent-a-lga.xx.fbcdn.net/hphotos-xaf1/v/t1.0-9/10155647_741156309282754_6400926312826707205_n.jpg ?oh=c4d407d2da52d73223bd3ef651f7d7a8&oe=54EB1DE5
asking $4500, I am near Chattanooga